Brake pad life

1.     Check the brake shoes once every 5000 km under normal driving conditions, not only check the remaining thickness, but also check the wear state of the shoes.     The degree of wear on both sides is the same, whether the return is free or not, and it is found to be abnormal.     The situation must be dealt with immediately.

2.     The brake shoe is generally composed of two parts: the iron liner and the friction material.     Do not replace the shoe after the friction material has been worn out.     For example, the front brake shoes of the Jetta, the new piece has a thickness of 14 mm, and the ultimate thickness of the replacement is 7 mm, including more than 3 mm of iron liner thickness and nearly 4 mm of friction material thickness.     Some vehicles have a Brake Shoe alarm function.     Once the wear limit is reached, the instrument will alarm to change the shoe.     The shoe that has reached the limit of use must be replaced.     Even if it can be used for a while, the brake effect will be reduced.     Affect the safety of driving.


4.     When replacing the brake shoes, special tools must be used to push the brake cylinder back.     Can not be pressed back with other crowbars, which will easily cause the Brake Caliper guide screws to bend and the brake pads to be stuck.

5.     After replacing the brake shoe, be sure to step on the brakes to eliminate the gap between the shoe and the Brake Disc, causing the first foot to not brake, which is prone to accidents.     After the replacement, it is necessary to run for 200 km to achieve the best braking effect.     The brake shoe that has just been changed must be driven with caution.